Is DDR3/1600 the same as PC3-12800?
DDR3 and PC3 mean the same thing, one rates by clock speed, the other by data bandwidth. PC3-12800 has a data rate of 12800 MB/s and runs internally at 1600MHz (clock speed 800MHz), so can also be called DDR3-1600.
What is the difference between 12800 and 1600 Ram?
New chipsets and processors from AMD® and Intel® now support memory operating at 1600MT/s (aka 1600MHz). DDR3-1600 memory has a module classification of PC3-12800, which effectively means the peak data rate of the module is 12.8GB/sec (see table). That’s about a 17% improvement on memory bandwidth over DDR3-1333.
What PC3-12800 800Mhz?
PC3-12800 = DDR3-1600. DDR means “Double Data Rate”. So DDR3-1600 means it is 800Mhz with a double rate (effectively 1600Mhz). In short, 800Mhz is the right number.
What is 1600 MHz DDR3 memory module?
Crucial DDR3 1600 MHz SO-DIMM Overview The non-ECC unbuffered DDR3 PC3-12800 RAM memory module features a 1600 MHz clock speed, a CAS latency of 11, and a power rating of 1.35/1.5V. To use this module, your system must have both a 204-pin SO-DIMM slot and a DDR3-enabled chip.
Is 1600mHz RAM good?
For most games, 1600mhz RAM is a good enough speed. You won’t run into many issues, as long as the other pieces of your build can live up to the speed. One thing to note is that most DDR3 1600mhz RAM devices are significantly impacted by other devices in your computer.
Can you put DDR3/1600 in 1333?
The compatibility of the ram depends more on your motherboard than your cpu. If your motherboard supports the 1600mHz, then it is likely that the g3258 will also. However, the cpu spec sheet says that it only supports up to 1333mHz, so if you use 1600mHz sticks it may downclock them to 1333mHz.
Can I use PC3 10600 instead of PC3 12800?
PC3-12800 works just fine as PC3-10600 speeds.
What does 1600mhz mean?
A DDR3 1600 Mhz RAM operates at a 1600 MHz clock, and a 1600 MHz clock cycle takes only 0.625ns to perform, meaning it is very fast and can handle most tasks, including gaming. A device using this speed will use a 1600 MHz wave to transfer data 3200 times per second. For most games, 1600mhz RAM is a good enough speed.
What enables DDR3 memory to be faster?
Higher bandwidth performance, effectively up to 1600 MHz: The main benefit of DDR3 comes from the higher bandwidth made possible by DDR3’s 8 bit deep prefetch buffer, in contrast to DDR2’s 4 bit prefetch buffer or DDR’s 2 bit buffer.
Is it better to have more RAM or faster RAM?
While RAM speed is important, it’s better to have more RAM than faster RAM. If you’re configuring your PC and have budget constraints, then you might find it economical to buy more RAM that’s rated at a slower speed than fewer, faster modules.
Is 1600mhz RAM too slow?
DDR3 1600mhz RAM For most games, 1600mhz RAM is a good enough speed. You won’t run into many issues, as long as the other pieces of your build can live up to the speed. As we move toward the future, DDR3 1600mhz is going to become obsolete, especially as DDR4 takes over.
How do I know if my ram is 1333 or 1600?
Clearly, you can see my ram is 1600 mhz from the name. BUT standard setting for all DDR3 sticks is 1333 which is JDEC standard. This is the default setting that most motherboards are set to as long as your Ram can atleast support 1333mhz. You’d need to overclock your bios to get 1600 mhz.