Why did my crossbow string break?
Probably the number one cause of broken crossbow strings is the bolt not being seated tight against the string. If the bolt isn’t tight, the string will jump over or under the bolt, resulting in a dry fire effect. The bolt will only go a few feet. The fletching may be torn or damaged.
How long do Barnett crossbow strings last?
HOW LONG SHOULD STRINGS LAST? With proper maintenance of the string and the crossbow itself, the string should last a minimum of 100 shots, with several hundred shots not uncommon.
How does the safety work on a Barnett crossbow?
This Barnett crossbow is equipped with an automatic anti-dry fire safety mechanism which engages when the crossbow is cocked. An arrow must be loaded into the arrow/flight track to release the safety and the safety must be disengaged or in the “off/fire” position before each shot.
How fast is a Barnett raptor?
Barnett Raptor Review – Compound Crossbow
| Model | Draw Weight | Velocity |
|---|---|---|
| Barnett Raptor Check price on Amazon.com | 150 lbs. | 330 FPS Crossbow Academy: ballistics, sighting, tuning |
What happens if a bow string breaks?
It could result in bruises, scars, bleeding, large swelling, and if it hits your face or your eyes, be potentially blinding. You just have to look up “bowstring snap injury” to see a large gallery of injuries that have resulted from bowstring breakage.
Does it hurt to leave a crossbow cocked for a few days?
Do not leave your crossbow cocked for longer than a 24-hour period, as premature stretching of the string and cables may occur, leading to a loss in crossbow performance.
Are Barnett crossbows good?
If you know anything about crossbows and the top manufacturers, you will know that Barnett Crossbows are one of the best brands around. They produce some of the best crossbows on the market that shoot fast and accurate but are still affordable. They are lower priced than Ravin Crossbows but still top quality.
How do I know when to replace my crossbow string?
Change your strings according to hunting seasons On average, you should replace your crossbow strings after every 2-3 hunting seasons. If you’re a serious hunter, get into the habit of regularly giving your strings the love they need from season to season.
How fast is the Barnett recruit?
330 fps
Features / Specifications
| Draw Weight: | 130 lbs |
|---|---|
| Bow Weight: | 6.4 lbs |
| Speed: | 330 fps (measured using a 380-grain arrow) |
| Kinetic Energy: | 91.9 ft lbs (2017 model) |
| Axle to Axle: | 16.125″ |
Who makes the killer instinct crossbow?
HAWK Group
Many folks don’t know that Killer Instinct is actually owned by HAWK Group, which many hunters may recognize for their treestands and other “hunt from above” products. Along with HAWK, Killer Instinct is headquartered in Frankenmuth, Michigan.
Are there any problems with the Barnett Raptor crossbow?
The Barnett Raptor’s safety and anti-dry fire mechanisms work flawlessly every time, and the bow looks quite nice. However, something is amiss in manufacturing and the crossbow suffers from broken strings far more often than any crossbow should. I had a total of three Raptors, and the strings broke on each and every one of them within a few shots.
Why does the Barnett droptine crossbow have a narrower string?
This makes for a narrower width crossbow, both when uncocked and cocked and by doing this the string angle at the tumblers are much narrower. Also with a narrower crossbow, the “Y” section of the cables have a steeper angle where on some crossbows (my 2018 Barnett Droptine STR) one has to be very careful when leveling the cams.
What kind of arrows do you use with the Barnett Raptor?
Barnett includes 3 20” Headhunter arrows with the Raptor. These are decent enough arrows, but I would recommend upgrading to Carbon Express or Firebolt arrows, instead. Stick with 20” arrows at 400-grain or higher, and you’re golden.
Why are my Barnett whitetail pro crossbows not working?
This series of crossbow never had the cams leveled and due to this when shooting the string was “thrown” or dropped down on the cam. The edge of the cam near the rail-stock was tilted downward which caused that problem.