What is the Whmis symbol for compressed gas?
The hazard symbol is a picture of a cylinder or container of compressed gas surrounded by a circle. Additional dangers may be present if the gas has other hazardous properties. For example: propane is both a compressed gas and it will burn easily.
Is compressed gas part of Whmis?
Thousands of products are available which contain gases and mixtures of gases stored under pressure in cylinders. Most of these gases are classified as “compressed gases” according to WHMIS 1988 technical criteria. The Controlled Products Regulations contain details of these criteria.
What are gases under pressure Whmis?
Gases Under Pressure are gases which are contained in a receptacle (container) at a pressure of 200 kPa (kilopascals) or 29 psi (pounds square inch gauge) or more, or which are liquefied or liquefied and refrigerated. This includes compressed gases, liquefied gases, dissolved gases, and refrigerated liquefied gases.
What symbols are in Whmis 2015?
WHMIS 2015/GHS Symbols & Their Meanings
- Exploding Bomb (Explosion or reactivity hazards)
- Flame (Fire hazard)
- Flame Over Circle (Oxidizing hazards)
- Gas Cylinder (Gases under pressure)
- Corrosion (Corrosive damage to metals, skin, eyes)
- Skull & Crossbones (Can cause death or toxicity with short exposure to small amounts)
What are the three components of Whmis 2015?
What are the main parts of WHMIS? The main components of WHMIS are hazard identification and product classification, labelling, safety data sheets, and worker education and training.
What are the 9 hazard symbols?
Hazard pictograms (symbols)
- Explosive (Symbol: exploding bomb)
- Flammable (Symbol: flame)
- Oxidising (Symbol: flame over circle)
- Corrosive (Symbol: corrosion)
- Acute toxicity (Symbol: skull and crossbones)
- Hazardous to the environment (Symbol: environment)
Is compressed oxygen explosive?
It may be hard to believe, but oxygen can also be dangerous. The dangers are fire and explosion. Oxygen behaves differently to air, compressed air, nitrogen and other inert gases. Pure oxygen, at high pressure, such as from a cylinder, can react violently with common materials such as oil and grease.
What are two types of WHMIS training?
There are two types of WHMIS training. General Training, which is commonly referred to as “Education” or “Generic WHMIS Training”, and Workplace Specific Training.
Which pictogram is for gasoline?
The gas cylinder pictogram is used for the following classes and categories: Gases under pressure (Compressed gas, Liquefied gas, Refrigerated liquefied gas, and Dissolved gas)
What are the 2 types of WHMIS label?
There are two main types of WHMIS labels: supplier labels, and workplace labels. Suppliers of hazardous products are required to apply a label that meets the requirements of the Hazardous Products Regulations. If the hazardous product is always used in the container with the supplier label, no other label is required.
What are the 3 basic elements of WHMIS?
WHMIS is a communication system on the hazards of controlled products in the workplace – from the suppliers of controlled products to purchasers, from employers to workers through the three key elements of: labeling, material safety data sheets and workers education.